Shenzhen Konroy Technology Co. , Ltd.

[maintenance guide] do you really understand earphone maintenance?

Release time: 2020-09-22 11:09:26  Hits: 6

Nowadays, people's pursuit of high-quality and good sound is getting higher and higher. We often spend a lot of money to buy a variety of high-quality headphones. And when we buy earphones, we begin to highlight some problems, such as wire wear, how to clean, how to cook better and so on. If the favorite earphone is carefully maintained by the user, its use time will also be extended.

Now Runfeng will introduce the most basic common sense of earphone maintenance for the partners, hoping that friends can understand the basic knowledge of these earphones in daily life to better maintain their own earphones.

Earphone Maintenance Tips

▍ the volume of the headset must be controlled

It can be said that this is the most easy mistake for users of headphones, because many users like to turn the volume of the headset to the maximum. Although listening is more enjoyable, it will cause the greatest damage to the ear and the diaphragm. In serious cases, it will burn the voice coil and cause inevitable losses.

▍ keep away from strong magnetic field and humid environment

This is the most basic knowledge of using earphone. The strong magnetic field will cause certain damage to the sensitivity of earphone and the sound quality of earphone can not be ignored. In humid environment, the pad of earphone unit will be rusted, and the earphone will have serious tone deviation. Therefore, friends should pay attention to this point.

▍ the wire of earphone must be protected

It's like wiping off the sweat on the earphone cable in time after sweating, otherwise it will cause certain corrosion to the earphone wire, and try to keep away from fireworks when using the earphone. No matter whether the wire or the ear shell is burned, this loss is absolutely irreparable.

▍ the protection of wires and earphones is more important in winter

Because of the lower temperature in winter, the lower temperature will make the earphone wire more vulnerable, and if you don't pay attention to it, it will break. If you use the earphone outside and enter the warm room, the change of the temperature difference will cause the aging of the earphone wire and the unit.

▍ wearing headphones when you sleep is really damaging

Because friends will turn over or move unconscious when they fall asleep. At this time, if they wear earphones, the wire will cause certain entanglement or crush the ear shell. At this time, it doesn't matter if the earphone is broken. If you hurt yourself again, you will lose nothing. So even if your friends are used to listening to soothing music when you fall asleep, you must put your ears before you go to sleep Take down the machine. Remember this one.

▍ attention should be paid to the insertion and insertion to avoid the problem of unilateral sound

Some friends in the daily use of headphones, encountered the problem of earphone unilateral sound. This is probably caused by the solder joint loosening caused by pulling the wire by hand when taking off the plug. In fact, although there is a fixed layer between the earphone wire and the plug connection part, it is still very weak inside. Therefore, when inserting and plugging the plug, you should pay attention to holding the plug with your hand and then plugging it in to avoid this situation.

▍ don't pull the wire hard

When storing, do not use a strong way to fold the earphone wire, which will cause the surface cracking of the earphone wire, or cause certain damage to the internal wire of the earphone, resulting in the earphone does not sound.

▍ the new machine should be preheated at a lower volume

When you get a new earphone, try not to use a larger volume to impact the diaphragm. The correct way is to use a smaller volume to warm up the headphone first, and then use the lower volume and more soothing music to cook the earphone first, so as to achieve the best working condition of the diaphragm.

▍ try not to touch the unit with your hands

The unit part of the headset is relatively fragile, so when removing the earmuff, you must pay attention to protection, and try not to touch the unit with your hand, because even if there is no damage to the unit, it will also leave sweat stains on the unit, which will affect the sound quality.

▍ "boiling frog in warm water" way

You should use the way of boiling frogs in warm water to make a simple boiler. You can first turn the volume to half for a certain period of time, and then turn the volume to normal but not the maximum. The time can be calculated according to your own time. Don't ask for a specific time, as long as you feel that the sound is turned on, and then you can turn it on You can listen to the voice you like.

How should headphones be cleaned?

Let's talk about in ear earplug products. When cleaning these earplugs, it's best to use cotton swabs to drop alcohol to clean them. In this way, bacteria can be eliminated and dirt in the earplug sleeve can be cleaned. If not, you can use water to clean, but it is worth noting that whether you use alcohol or clean water, you should wait until the earplug sleeve is completely dry before placing it on the earplug for listening, so as to prevent the occurrence of water in the ear plug.

In the case of headphones, there is less dirt because there is no in ear earplug cover. However, sweat stains and other hard to clean marks will be left on the earmuffs during daily listening. At this time, you can take off the part of the earmuff, wipe it with disinfectant, or spray it with a spray bottle and then dry it with a paper towel.

Hope this article can help you in the maintenance of earphone!

Previous: Why is it best to wear a Bluetoot...

Next: What should be paid attention to ...